Octup Vero Layout!

[RaceDriver205]

Well its possible you've got as much as you can get. Try winding down the tone controls to zero, and selecting the bridge pickup.

[KerryF]

theres no tone control.  only a bias and a volume.  and i am using the bridge pickup.

[RLBJR65]

I'm with jmusser I bread boarded it once and played around some but could never get a decent octave out of it. Worked best for me with a single wound bridge pickup. Tim notes unmatched fets. I would guess he grabbed a couple at random but maybe his his were matched much closer than yours.

Richard

[RaceDriver205]

No no 1800, I meant the tone controls on your guitar

[KerryF]

ohhh  i will try that.  right now im starting the schematic for my September submission contest!!!   

[Fp-www.Tonepad.com]

sockets for the FETs would be wise. Also note that the FETs mentioned have different pinouts, BUT as far as I know, they all have the Gate on one of the outer pins, so if you had the pinout wrong, turning them around would fix it... so, socket those FETs.

Fp

[KerryF]

Im pretty sure I have them in right.  Can you please look at my layout and tell me how J201s would go in.  It would really help if you can draw up a quick thing showing how I should put them in.  Since you have experience with this all and I would really like to get this working correctly.

If you would do this, thanks so much.  I understand how buisy you are, but it would help a lot.

Thanks,
Kerry