phaser snapshots

[Thomas P.]

Here some (=two) snapshots of the phaser I'm working on. It's going to be a 2x6 stage phaser with several features like the bi-phase but with a few more.
To give maximum flexibility I developed a in/out board containing the buffers and the LFO's and a phase board with only the phase stages on it. The latter could therefore be used for different projects or just for different buffers and/or LFO's.
Also there are a few jumpers but I tried to keep the number down as far as I could for a singlesided board...

Any comments, thoughts, etc are welcome?


in/out board


phase board

The complete project will be available as soon as I finished a prototype.

[Arn C.]

Too Cooooooool Man! Wow, sounds like a real interesting project, gotta here some clips from this one!

Arn C.

[jrc4558]

I like how you laid out the phase stages. Mind if I try this method for Craig Anderton's Phaser?

[Thomas P.]

I like how you laid out the phase stages. Mind if I try this method for Craig Anderton's Phaser?

no problem! If you only need a single line of stages you could even implement the LFO on the same board. That'll save you some space...

[Thomas P.]

The one feature I try to implement is while in a parallel operation (like the mutron bi-phase) I will add the second phaser to the output buffer (which I guess becomes a summing amplifier). Now with each phaser operated with a seperate LFO I hope to get some funky sounds out of it. Also the second LFO could be turned off to achive some fixed delay.
The other features will include stage switches for 2,4 and 6 stages each and if it turns out good additional feedback switches for each stage.
And because I have a lot of surface left  I will add a univibe mod for the first 4 stages of each phaser...

hew - that'll be some wiring to do....