keeping boss pedals on... Help please

[msurdin]

so is all i would do then If i'm not trying to do anything else

so is it the parts on d3 and d4 on the ge7 i remove and jump?
and then on d4 and d5 on the bd2 gets jumped?
Can I see the schmatics u were looking at whenever u get a chance?

[msurdin]

Ok after reading it a few more times It seamed to me that i remove the FET and jump the 2 out side solder holes. Then the middle one gets jumped to the diode. Do I remove the diode? If so does it matter what pad i jump to? If i jeep the diode in what side to i jump to?

Thanks guys!

[msurdin]

Ok so I got it all working for the GE7. Sorry about all the repeted posts. Hopefuly the BD2 will be as easy...

Thanks

Matt

[tonefreak]

Sorry I wasn't around... I'm usually very busy at night.

[boyersdad]

Since these pedals use a flip-flop to automaticly have the effect off when they start up, can't it just be reversed to start turned on?

[soulsonic]

You could use a simple logic reset circuit.