My Dual AB Looper...little help needed

[BoostAddict]

Basically I'm trying to copy this looper from righteous tones
http://www.righteoustones.com/looper.html
If it's still hard to understand, download their manual.  It gives you more detail on it

I came up with this wiring from looking at some loopers here.  Can you guys check it and see if it's right?  Thanks
EDIT: Forgot one connection, fixed it and re-uploaded pics

[Pushtone]

No, that won't work. That is, it won't work well.

Avoid making those "y" connections. Thats where the problem lies.

There is a dual looper in the gallery. Study that and just add the master bypass switch.



I'm assuming you are not trying to incorporate the balanced XLR loop.

[Pushtone]

Your error is trying to return loop-1 (the one on the left) to the mater bypass switch. It should carry on to loop-2.

The way you have it now the master bypass will bypass loop-1 and let loop-2 still work.

I find it easier to figure these things out by drawing one pole at a time and ignoring the poles for any LEDs.

Here is a switching diagram that uses symbols to represent the poles.

[BoostAddict]

gotcha gotcha

just did it on a piece of paper, let me draw it online and can ya check for me one more time.  I think I got it 

[BoostAddict]

oh yea I was tryin to omit the xlr connections btw.  Here's v2, let me know what you think now.  thanks!

[Pushtone]

Much better, that should do it.

When I built my dual looper I used every lug on the switches following the GGG wiring method.
http://www.generalguitargadgets.com/pdf/two_in_one_wiring.pdf

Interesting how you managed it with one free lug.

[BoostAddict]

  It's my first time trying to wire something up on my own.  I basically used the 3pdt wiring diagram for a TB Looper from singlecoil.com as a reference.  Ordered some switches and plan on building soon, I'll post back here to see how it goes.  Thanks again for all the help