AXIS FACE DEBUG

[mcasey1]

Damnit, nothing I do works on the first try anymore.  Ive had a bad run lately.

Axis face silicon fuzz

http://www.indyguitarist.com/torchy/Distortion_Overdrive/Axis%20Face%20-%20Si/Axis_Si.gif

Q1
C=8.41V
B=7.40V
E=7.46V

Q2
C=8.12V
B=8.40V
E=8.66V

C1=4.36/7.38
C2=8.39/8.66
C3=8.08/8.08
C4=8.64/0

R1=8.08/4.06
R3=8.08/7.36
R4=8.36/8.63
R5=CHANGED TO 1.2K (8.63/8.62) THIS ONE COMES OFF THE +9V AND IT SEEMS THAT IT SHOULD KILL A LOT MORE VOLTAGE THAN THAT.

[KerryF]

Dont worry about your bad run.  I had that once, not too long ago.  It turns out good because from that you gain a lot of debugging experience.

[Dragonfly]

check your grounds.

[guitar_199]

agreed.  something is wrong in "ground land".  A good clue is the 7.46 on Q1 emitter ... when it is supposed to be tied directly to ground.