ZVex Knobs - Where can I get them?

[Floyd Pepper]

Anyone know where I can get small MXR style knobs like Mr Vex uses?  I can find the big MXR ones but I'm after the small versions.

I'm based in the UK.

Thanks

[The Tone God]

I think Mr. Vex gets most of his knob custom made.

Andrew

[Processaurus]

black fluted?

[jonathan perez]

ive got some very small black fluted ones, SIMILAR to Vex's, but sorta bigger...i get them at electronic stores.

if i find them online, ill post it...

[$uperpuma]

and the older ones with the pointer are similar to the Davies ones that Mouser has

[ubersam]

The black fluted one above looks similar to the ones I have, Mouser Part. No. 45KN013. They are 0.94" in diameter (24mm). There is also the bigger version, 1.32" (34mm), Mouser Part No. 45KN014. These are made by Eagle Plastic Devices (EPD).

[jonathan perez]

The black fluted one above looks similar to the ones I have, Mouser Part. No. 45KN013. They are 0.94" in diameter (24mm). There is also the bigger version, 1.32" (34mm), Mouser Part No. 45KN014. These are made by Eagle Plastic Devices (EPD).

that be them! 

[zachary vex]

naw, mine are custom-made and only .75" in diameter.

[markm]

naw, mine are custom-made and only .75" in diameter.

Jameco sells .75" too. 

[FcKw]

0.75" (19mm)? you can also get similar ones here in germany.

FcKw

[jonathan perez]

i didnt agree to those being the ones he uses, i agreed that those are the ones I use. 

[handwire]

naw, mine are custom-made and only .75" in diameter.

Jameco sells .75" too. 

Do you have the part number for those in Jameco??, i couldnt find it.

Thanks

[markm]

naw, mine are custom-made and only .75" in diameter.

Jameco sells .75" too. 

Do you have the part number for those in Jameco??, i couldnt find it.

Thanks

Sure do.
Jameco part # 104176CG

[MikeH]

I believe the fluted knobs that Effects Connection sells are the small variety.  About .75", I think.

http://www.effectsconnection.com/oscommerce/index.php?cPath=27&osCsid=126c5ff55538feaa5bf334a2c10f80ae

[zachary vex]

oh, those.  yeah, those i use on my Taiwan-made products and a few of the US products and they're pretty readily available.  i thought he meant the ones on the hand-painted fuzz factory, which are custom-made for me.

[jonathan perez]

on the jonny octave, too, right?

[Floyd Pepper]

Thanks for the replies.  I've been looking for knobs like on my Vex Fuzz Factory.  I'd seen the Small Bear ones but it didn't have the dimensions.  I'll follow up on the new leads.

Thanks.