Rebote Delay 2.5 mods - Effects loop, hold mode?

[freddd]

Hi there, I have a few questions on the Rebote Delay. I've been looking at the Sandwich Echo boxes that Colin over at www.eaced.com produces out of PB&J Delays and was wondering if it would be possible to implement some of these mods into the Rebote circuit. I'm especially interested in the effects loop and hold mode mods.

For the effects loop would I just be able to just splice a couple of jacks in between the 2 "Delay Out" points shown on the schematic, possibly with a buffer on the return jack just to pull those non-true bypass pedals through? Is it possible to mod a hold mode? Any ideas? I havn't got a clue!
Cheers.

[Sweetalk]

Those questions were asked a few times, search in the forum for those topics... The Hold mode it's not posible because the PT2399 doesn't have that function.

[Seljer]

for an FX loop I believe you'd want to play it after the 1uF cap and 2.7k resistor at pin #14 of the PT2399 (before the "repeats" pot)

[mattpocket]

some nice little toys over there!