Putting together FuzzFace from Fuzz Central

[jlullo]

Hey guys.  I'm boxing up my Fuzz Face and am using the layout found on fuzz central.
http://fuzzcentral.ssguitar.com/fuzzface/fuzzfacelayout.png

I'm just a little confused with the wiring-
there are only places to wire up 2 of the lugs on the "fuzz" pot, and 1 for the "vol" pot.  Do i just leave the other lugs disconnected?  also, there are 4 pads on the board for "ground"- where do those go?

as for the DC adapter, I'm building the PNP version-  how do i wire this up?  i see that the -9V lug on the 3pdt swtich goes to it, but i don't know how to wire the rest of it.



I've been to the FAQ of fc, but i'm still not clear on these things.

if anyone could help that would be great!

[Meanderthal]

 Doh! Screwed up that one, didn't I? Sheesh.

[Meanderthal]

 Fuzz 1 to ground. Volume 1 to ground. Volume lug 2 to output. Wire up your dc adapter opposite polarity to neg ground- just reverse polarity. Be sure to use a power supply seperate from any neg ground circuits.

[jlullo]

fantastic!  thanks, meanderthal!  what are the other two grounds on the board are used for?

[Meanderthal]

 Ground on input and output jacks.

[jlullo]

awesome.  thanks!