FF wiring

[jlullo]

I'm sorry about posting this again, but i'm having a very hard time figuring out how to wire up my Fuzz Face built from Fuzz Central.

Here are the resources i am using, found in the sites FAQ:
http://fuzzcentral.ssguitar.com/fuzzface/fuzzfacelayout.png
http://fuzzcentral.ssguitar.com/faq/switchwiringpnp.gif
http://fuzzcentral.ssguitar.com/faq/circuitwiringpnp.gif
http://fuzzcentral.ssguitar.com/faq/powerjackwiring.gif
and another member sent me this link to possibly cure my questions regarding the power jack: http://www.generalguitargadgets.com/diagrams/fuzzface_lo_pp.gif

if someone could walk me through this, and let me know if this is correct, that would be great!

starting with the PCB, i have the following pads
1. going to the input
2. going to fuzz lug #2 on pot
3. grounds for Fuzz pot  lug#1, Vol pot lug #1, input jack shield, output jack shield
4. 2 -9v dc pads going to switch (where it's labeled -9vdc), and to the negative wire on the battery snap
5. vol pot lug #3
6. fuzz pot lug #3

now, on the 3dpt switch i don't have many questions, but that where it shows where the resister going to the LED is connected, the other side of the LED is going to a ground.  where am i supposed to ground this if all 4 pads are already used on the board? also, the volume pot's lug #2 is the output, correct?

Finally, i'm at the DC adapter.  This one is throwing me for a loop.  At another member's suggestion, i wired it this way- http://www.generalguitargadgets.com/diagrams/fuzzface_lo_pp.gif .  i'd explain how i wired it, but i can't find any info on what lug is the tip, shield or ring.

could someone please help me with this?  i'm in need of some help on this one!

[joegagan]

looks like you have everything correct on your list.
the hookup for your LED ground can be hooked to the closest ground, just pick one, they all connect.