AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

11vac input to DIY stompboxes

Started by petemoore, June 16, 2007, 02:30:46 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

petemoore

June 16, 2007, 02:30:46 PM
  I'm thinking about a 'Spyder 'solution'...
  Run AC to SB's, once inside, the DB and smoothing caps convert this to DC, 7809 converts that to 9v regulated.
  Any problems [other than non compatibility]? with this method?
  Then would I have to use a switch to lift the DB in case I also wanted battery power, or could I leave the diode bridge connected and simply lift the 11vac input, add 9vdc via battery to the circuit power rails?
Convention creates following, following creates convention.

R.G.

#1
June 16, 2007, 03:21:21 PM
Loss of compatability is not a trivial problem to have.
R.G.

In response to the questions in the forum - PCB Layout for Musical Effects is available from The Book Patch. Search "PCB Layout" and it ought to appear.
Print
Go Up Pages1
User actions