AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

Symmetrical or asymmetrical diodes for clipping?

Started by aron, October 16, 2007, 05:32:25 PM

Previous topic - Next topic

Do you usually use symmetrical or asymmetrical diodes for clipping

I like symmetrical.
11 (19.3%)
I like asymmetrical.
31 (54.4%)
I can't tell the difference.
14 (24.6%)
I don't use diodes.
1 (1.8%)

Total Members Voted: 57

Print
Go Down Pages 1 2 3
User actions

Mark Hammer

#40
October 19, 2007, 05:09:45 PM Last Edit: October 19, 2007, 05:11:56 PM by Mark Hammer
Just a bit. :icon_lol:

Actually, it never really hurts to draw a schematic differently than the way one is used to.  Sometimes the canonical schematic format can have too strong an influence on our thinking, a bit like the way you get used to looking at a map a certain way.  Once in a while you have to look at Italy in a way that it doesn't look like a boot. :icon_wink:

WGTP

#41
October 24, 2007, 04:16:45 PM
http://www.aronnelson.com/gallery/v/WGTP/FeedbackLoop_001.GIF.html

How about this one.  It is an attempt to get both diode to ground and diode in the fbl at the same time.   :icon_cool:
Stomping Out Sparks & Flames
Print
Go Up Pages 1 2 3
User actions