new fuzz.

[Marc.yo]

i used this design a while ago. if you wanna check out the original, it's at aaroncake.net under guitar fuzz.


it's a pretty stonerish fuzz. it gets a good doom sound...but if you added a resistor after the input cap and changed the value of the resistor in the - feedback loop, you'll get less distortion.



clip
rythm is a squier strat (affinity) using the dream90 from gfs in the neck -> fuzz -> dano pb&J delay -> bandmaster -> marshall cab 4x12
the delay doesn't come in till later

lead is same rig only with the dano turned off but still in the effect line.

[Marc.yo]

bump

[superferrite]

Might try a 500K pot instead of the 470k resistor?  Would it just crap out if the pot was set too low?

PS, I love my Mean 90s

[mac]

Would it just crap out if the pot was set too low?

No, buffers use a wire between pin 6 and pin 2. But you could try a small resistor in series with the cap.

mac

[Gus]

Read the Grunt box threads for some hints.

[mac]

But you could try a small resistor in series with the cap.

I mean the pot... 

mac