Foxx Tone Machine--Wiring Diagram (Question)

[Chawk]

I only write this as a last resort. I've scoured the archives for previous threads on the topic and have found a few relating to this problem but none have been able to solve my issue. I created this diagram representing the way that I wired up my Foxx Tone Machine clone based on J.D. Sleep's work at GGG. But I added the 3PDT switch to operate the LED that I threw in there. Can one of you fine experts take a look and see if this is wired correctly because it doesn't seem to be working for me. Even though logic tells me that it should. Am I missing something?

My wiring diagram:
http://chawk.files.wordpress.com/2008/03/wiringlayout1.jpg

Here is the diagram from GGG:
http://www.generalguitargadgets.com/diagrams/ftmpl.gif

Any help would be appreciated.

Thanks!

Matt

[theehman]

It looks OK.  Is the LED hooked up backwards?

[Chawk]

Yes sorry I didn't make that clear in my first post. The LED is actually working correctly there is no sound when activated though.

[theehman]

OK.  The signal switching in your diagram looks fine.  Is there signal in bypass mode?

[Chawk]

It seems to be working fine now. Turns out I had a short in one of the patch cords I was using. Oops.