AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

What to change to make a color-sound inductorless wah work for bass

Started by dellamorte, June 13, 2008, 01:28:10 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dellamorte

June 13, 2008, 01:28:10 AM
i have changed the input cap to a higher value to let more bass thru. i drew up a spice model to get an idea of what to change and from the simulation changing the 2.2nF and 6.8nF caps to 6.8nf and 15nf respectively shifts the sweep range down to where the highest is at about 1k and the low is about 100hz. would this work for a bass?
Built=SHO,DOD 250,Atari punk console,Fuzz Factory,Easy Vibe,Burning Crunch,Modded Vm fuzz (2n5088+bmp tonestack),Wah Probe,Wooly Mammoth,Eternity,Big Muff Tri
Up Next = ???
Eventually = Firefly, rackmount L5 preamp
http://dellamorte.gofreeserve.com
Print
Go Up Pages1
User actions