Wiring

[criss]

I found this exellent wiring how to at Bevisaudio but i thought i better ask if ive connected this up correctly

Output from  pot to output lug on 3pdt switch

IN from PCB to input lug on 3pdt

+ from 2.1mm to + on PCB

All grounds from pots and 3pdt switch and input/output jacks to grounds on PCB 

Now i think i ve done all this correct but what about my negative  - on PCB

Any input would be a big help , sorry for the noob question

Thanx

[MikeH]

Usually a "Batt -" is just a pad that connects to another pad that connects to the ring of the input jack, but on this pcb it looks like it just connects to ground.  Don't connect you battery there or it will drain!  Connect the batt - to the ring (middle) on your stereo input jack.  Beavis has the power jack - connected there as well, but it's not necessary.  Only the batt - needs to connect to the ring.