Mu-Tron Octave Divider

[loss1234]

hmm
the link seems to be dead on the layout hank did

[Mark Hammer]

If you're talking about these links: geocities.com/munkydiy/mubd1.jpg     geocities.com/munkydiy/mubd2.jpg
...you have to "graft" them.

Thse links should bring up the images.  They work for me.
http://www.geocities.com/munkydiy/mubd1.jpg
http://www.geocities.com/munkydiy/mubd2.jpg

Note that what you will see is not a ready-for-transfer pattern.  They are pencil and paper drawings.  The pattern may well work flawlessly for all I know, but it isn't quiiiiiiiiiiiiite ready just yet.  Big head start, though.

[birt]

a very good drawing to have near when you start doing the layout on the computer

[sverige_cruz]

Some work derived off the "munkydiy" layout. Audio section for now...

Schematic: http://img.villagephotos.com/p/2006-3/1166256/AUDIO_SCHEMATIC.jpg

Overlay: http://img.villagephotos.com/p/2006-3/1166256/AUDIO_pcb_OVERLAY.jpg

Wires/Hookups: http://img.villagephotos.com/p/2006-3/1166256/WIRES.jpg

Next step - do the logic section and order some parts... put together and see what happens. Munky's logic layout seems a bit different from the schematic though. Anyone got any ideas about this?

Cheers,
Jesus

[StephenGiles]

I was listening to Ritchie Blackmore's Rainbow from 1996 in the car this morning, and he appears to use an octave divider in one or two solos, which adds a new dimension to his incredible playing - I have to say that having listened to and watched this man play over the last 46 years, he is safely in the top 2 guitarists of all time - both of whom are English

[Praying_V]

So what's happening with this?  Jesus: did you get any further with the PCB layout?  I'd be happy to finish it from the schematic if you could send me the file.

[JOHNO]

Hows this build going Mark,any luck yet?

[Mark Hammer]

Nope.

[sverige_cruz]

No further here - been busy. The schematic's on the 1st page, via a PDF link. Go for it. I'll build this thing some future day. Never started the logic section.