Wanted: OLC English Channel Pics

[smoky]

Wanted:  OLC English Channel gut shots.  I've been slowly working on this one and here's what happened. 

1) It didn't come with any instructions - Searched their site and nothing.  So I sent an email and they sent them to me. 

2)  The instructions are for a different PCB. 

3) I ask for and receive the updated one.

4)  The updated one is for the board only and doesn't include wiring.  This is where I'm at.  Anyone have a pic of the latest version of the OLC English Channel wired up?  I just need to see the wiring so I can complete the pedal. 

Thanks much!

[kurtlives]

I built my EC on vero so I guess that dosent help you much does it?

[scott1568]

I'm gonna try and help you here, but it will be tonight . I had the same issue.

[aziltz]

maybe this will help...

http://www.aronnelson.com/gallery/main.php/v/MarkMs-Gallery/album23/album46/FXec03_001.jpg.html

[scott1568]

"Hi Mark,
The English Channel Board is difficult to orient with the layout shown in the instructions. The traces seem to be different. Any advice?"


My apologies. It's a newly-designed and manufactured PCB. There is an updated parts layout . For the pot wiring (R5, R10, R12, R20, R26), please note the "3  1" or "1  3". "2" will always be in the middle. - Mark

I used the old PCB for the wiring as far as jacks, switch, etc

[Gila_Crisis]

the olc english channel is just the same as the english channel you find on runoffgroove ;-)

[smoky]

Thanks for everyone's help so far!  The board I have is different than the runoffgroove one on their site.  I'm trying to find where to plug in my pots, the in/out, and the ground. 

[B Tremblay]

By looking at the layout and the schematic, you can determine the offboard wiring.