fuzz central pcb layout

[starekase502]

im tryin to make a few pcb from fuzz central and im printing out at 30% like the page says but they are comeing out really small

axis wah buffer  1/2 in by 1 1/2 in
rang master 7/8 by 15/16  give or take
axis face 1 1/4  by 7/8 give or take

is this normal dose anyone know the size of these boards

i blew the axis wah buffer to 40 %
and it reads 2in by 1 1/4
any help

[biggy boy]

Do you have a link to the boards you are talking about so we can see.


Thanks
Glen

[starekase502]

so sorry i assumed everyone new fuzz central and would telapathiclly know which pcb i was talking about well you know what assuming will do thanks for your help

http://fuzzcentral.ssguitar.com/mccoy/bufferpcb.gif
http://fuzzcentral.ssguitar.com/axisface/axisfacesi3pcb.gif
http://fuzzcentral.ssguitar.com/rangemaster/rangemasterpcb.gif

and the homepage
http://fuzzcentral.ssguitar.com/index.php

[biggy boy]

Not sure what size to use for that site.
For Markm stuff I reduce by 49%

Link to Mark's PCBs  http://www.aronnelson.com/gallery/main.php/v/MarkMs-Gallery/album15/album76/

What I do when I don't know the size is print it out on plan paper and set parts (components) on top of the paper.
Then keep redusing and printing test paper out until the parts fit nice. Of course if there is an IC in the PCB this helps to gauge the right size.
This method can be a bit time consuming thou.

Glen

[jrod]

I just printed out the Rangemaster pcb at 40% and it was just a smidge too big for a box film cap. So, I tried 30% as stated on the site and the box cap fits perfectly. But, the darn thing is so small I don't see how any other components would fit.  I'm with ya starekase.

Of course the ones with measurements you could just print it 'till you get it right. I didn't try any of those yet.

Let us know what you end up with. I'd like to know.

[starekase502]

well it looks like the sizes are right just darn these things are small
still if anyone has buid any of these effects and can measure the pcb for me it would be great just to make sure