On-off-on Color switch for Small Stone??

[Gila_Crisis]

Yesterday i finished to populate the pdb of my small stone (tonepad layout).
i wanted to try it quick just to see if all was right and the circuit worked, so i soldered only the pot and the audio and DC jack, but (afer studing i bit the schem) i left out the switch.
I found out that the small stone works without the switch as well. so i was thinking, why not use an on-off-on instead of the on-on switch?
maybe the off position brings out a new shade from the stone!

what do you think about?

[Mark Hammer]

Better yet, diaggregate the two functions of the Color switch into two on-off-on toggles.  One adjusts regeneration, while the other alters sweep width/lfo-range.

[Gila_Crisis]

well i want to have only one switch. i also have an original reissue Small stone, which is in my main peadlboard.
i built this one for my mini backup board (i'll box it in a BC box, it's a B box but taller, i needed it to be small as possible), so i wanted to keep it allmost like the "real one".

so i think i'll give a try to the on-off-on, thank you mark