Rebote 'oscillation' mod

[gutsofgold]

So I added the instant feedback/oscillation switch to my Rebote 2. I used this layout here with the pot and momentary switch:



Now it does what it is supposed to do alright but a few things I would like to change.
- The oscillation switch only causes oscillation if the repeat pot is set almost to max. Can I make it so that I get instant feedback/osc at any repeat setting?
- If you're not careful the oscillation spins out of control VERY fast and increased volume rapidly. Is there a way to limit this and keep the oscillation at the same volume the delay or guitar signal is at?

Thanks!

[nordine]

- If you're not careful the oscillation spins out of control VERY fast and increased volume rapidly. Is there a way to limit this and keep the oscillation at the same volume the delay or guitar signal is at?

it has been used a set of antiparalell silicon diodes (TS style, "clipping diodes") in the feedback loop of the delay, so when it overdrives and blooms, it gets cut at acceptable levels

[gutsofgold]

Hey thanks. Would I want the antiparallel diodes placed somewhere near the output buffer stage (the TL072 towards the output)

http://img167.imageshack.us/img167/3985/reboteschemik6.jpg

The schem ^^^

[jmwreck]

is this modification verified, i want to try this on my build, hopefully, the external one, to add some quantity on my board