New Transfo= No sound on a Tremolo....

[timififilger]

Hello,
i'm a bit disapointed.
Worked hard on a pulsar and it worked.
clean sound no buzz.
And one day, i used an other transf but i think i didn't respected polarity.
now, the led works, i hear the trem effect but no sound...
Must be very simple but i cant' find the problem.
Any idea?
Also, for a MXRdisto +i have a problem:
this is a ggg project.
the led works, but i only have a big buzz, that i can modify with potentiometers but no sounds.
if you could help me, it will be great!
best regards from france, and sorry for my poor english.

[aron]

I would try checking the op amp - hopefully you used a socket. Check your voltages too.
As for the Distortion+ this might be just a soldering or wiring problem from the input jack to the input of the IC.

Aron