DP3T without a DP3T

[alparent]

OK let me explain.........being ignorant in a lot of things.......this being one.  

I would like to select between 3 different capacitor and light a corresponding LED but without using a DP3T switch.

I would like to use  something like a 4066 chip.

I would like to use a momentary switch and each time I push the switch it changes the capacitor and the LED.

Hope I'm being clear?

I suspect this is going to be simple but I need guidance.

Thanks for your help.....................as always!

[alparent]

Ok found some stuff on R.G. site ................ reading that now...............

[Mark Hammer]

And if you're still on your lunch, read this as well:  http://hammer.ampage.org/files/quadsequentialswitch.pdf   

My guess is you have a 4017 or two, right?

[arma61]

... and this was born from Mark link ! (thx again Mark!)

http://www.diystompboxes.com/smfforum/index.php?topic=63536.msg512594#msg512594

http://www.diystompboxes.com/smfforum/index.php?topic=64228.0

Cheers m8s
Armando

[Mark Hammer]

Cool!  I must have missed that thread when it originally cropped up.  Thanks.

[arma61]

To you Mark


here is the "beast"





Armando