News:

SMF for DIYStompboxes.com!

Main Menu

sound but no overdrive

Started by cafilener, September 23, 2009, 03:20:50 PM

Previous topic - Next topic

cafilener

Ok, got sound through but no overdrive. Any ideas? Checked, rechecked, and checked again but I must be missing something. Thanks

BTW. A very nicely put together project page. Even made it simple enough for me to try :D

aron

Look around the gain pot - somehow there must be a bad solder joint or a mistake in the wiring.

axemurderforhire

no point in starting a new topic, but im have the same problem, full clear sound with just a hint of gain but nothing like its supposed to, anyone shed some light on this. All the voltages check out ok ,checked and checked and rechecked the layout and re built it twice just in case i missed something

bayex

my first project, i got sound amplified but not overdrive/distort..  ???
but after  i replace elcetrolit capasitor, its work so fine.  ;D

axemurderforhire

cheers for the reply  but which capacitor and what uf did you change it too

Ned Flanger

Any luck on the overdrive?  I just finished a Distortion+ and it is lacking in the distortion department.  I was wondering if it was just me.

axemurderforhire

yeah i changed the cap after the ic ( C4 ) to 10 uf and i got a nice gainy overdrive, going to try the distortion + next myself, hope its of some help