1st DOA Pedal (Rodent)+ 1st Successful Trouble-shoot!

[JAC JR]

Hi Everyone,

I just wanted to say thanks to everyone for contributing to this wonderful forum. I just started building pedals recently and after building a Big Muff, Fuzz Face, Blues Breaker, and a Super Fuzz with no issues, I had my first experience with a DOA pedal. The culprit was a Rodent board from GGG. I used the debugging procedure you guys recommended. After pulling my hair out checking everything for a week I remelted all my solder points on the PCB.....bingo! I immediately got all the correct voltage readings on my op-amp socket.

I have a good amount of experience lurking/reading pro-audio forums and the culture on this forum is a real breath of fresh air. Thank you for generously sharing your time/knowledge!

James