Geofex Hum-Free Splitter Question

[Kinetic]

Hi all, I want to built a signal splitter to send my guitar signal to three different inputs (2 amps + a POD).  I'm looking at the Geofex hum-free splitter schematic found here: http://www.geofex.com/FX_images/splitter.gif

That circuit has three outputs; two are transformer-coupled and one is a direct output.  Would this do what I want it to do, or do I need to modify the circuit to add a third transformer-coupled output?

Thanks!

[PRR]

> Would this do what I want it to do

Probably. The guitar works fine straight into one amp(?), without isolation. The problem comes with multiple amps tied together both at the inputs and at the wall-plug. Keen's splitter breaks the signal lines.

If you have some odd case, it would be trivial to add a third transformer. (That's about the limit,  2 to 4; if you needed ten outputs you'd get weak sloppy bass and would want a stronger opamp; but three should be OK.)

[familyortiz]

Here's a good link to the original RG design and some other info.

http://www.diystompboxes.com/smfforum/index.php?topic=64924.0

[Kinetic]

Brilliant, thanks chaps!

[familyortiz]

Kinetic,
You're gonna love the design. It performs as well as any $100+ thing out there and the components are pretty inexpensive. Have fun.