cutting highs on ad3208?

[ppatchmods]

built an ad 3208 and love the sound. i let my bro play it and he wanted to know if i could cut some highs from the repeats. anyone done this or know about where to look on the schematic? thanks

[Mark Hammer]

Yes.

See that 100k resistor that feeds the compander chip from the wiper of the Repeat control?  Split it into a pair of 47k (or a 51k and 47k if you want to be picky) in series, and run a cap from their junction to ground.  The rolloff is given by Freq = 1 / [2 * pi * Rmeg * Cuf).  So, for example, 47k and .0047uf to ground gets you a rolloff starting around 720hz.

Pretty simple, eh?

[ppatchmods]

nice! thanks Mark! oh by the way, you were helping with the dry out on this circuit a while back. i posted my switch concerns on this thread: http://www.diystompboxes.com/smfforum/index.php?topic=84679.0

i'm gonna give this a try this weekend, but do you see a better way to wire it? thanks so much!