dr boogie pcb?

pazuzu · January 04, 2011, 08:57:51 PM

anyone have them for sale?

dougman0988 · January 04, 2011, 09:56:34 PM

http://www.guitarpcb.com/apps/webstore/

I'm in the process of building a Boogie 57 right now, using the PCB from the above link. Great deal if you don't want to make your own board.

mhartington · January 04, 2011, 11:35:43 PM

the boogie 57 is much better than the standard boogie IMHO. Lot less unwanted noise from the high gain and makes cranking the gain much more fun.

pazuzu · January 05, 2011, 12:13:07 AM

thanks. i started a perf project but after populating about half the board i just lost interest. i still have all the nice box caps though so i feel like i should do something with them.

Jhouse · January 05, 2011, 01:04:12 AM

I just recently started using perfboard actually, but I have at least 15 unfinished projects lying around my house that are about half done.

"Holy crap this circuit looks awesome. I MUST have it now!" *five minutes of populating later* "Ehh. I don't even feel like soldering this"

pazuzu · January 05, 2011, 01:45:04 AM

the only thing i have never went seen through to the end is the boogie, granted about half my projects met their end by my 3 lb. hammer, but still, they all got boxed up and put into a signal chain. i think i just took on too much with the boogie. maybe if i went at it every other hole in the perf and soldered as i populated it....less anger management if i just buy a pcb.

maxj · January 05, 2011, 03:27:09 AM

Can someone plz share a pdf version of it?

Perrow · January 05, 2011, 10:21:08 AM

Quote from: maxj on January 05, 2011, 03:27:09 AM
Can someone plz share a pdf version of it?

Not a pdf, but I think you get enough information here:

http://gaussmarkov.net/wordpress/circuits/dr-boogey/

auden100 · January 05, 2011, 10:49:18 AM

Just join guitarpcb.com as a member (free), and you can see the build report. Has layout, schematic, parts list.

soupbone · January 07, 2011, 06:58:02 AM

I'm building one me self right know.Barry from Guitarpcb even sent me some sockets for the transistors,and a 3dpdt wiring board with an onboard clr and led!Pretty cool dude!

gators81 · January 07, 2011, 10:06:07 AM

I joined Guitar PCB and i must say I recommend everyone to join. The PCBs he sells are great and his chat section is nice for quick response. Ive built 3 projects from his boards and use the 3pdt pcb in all my builds now.

News:

dr boogie pcb?