AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

Mark Hammer's "The Crank"

Started by soupbone, August 26, 2011, 02:44:43 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

soupbone

August 26, 2011, 02:44:43 PM Last Edit: August 26, 2011, 02:48:23 PM by soupbone
I found this layout for "The Crank" by Mark Hammer.I just need to know where the wires are going from the board to a 3pdt switch.Any help would be greatly appreciated! :icon_biggrin: Here's the layout;http://imageshack.us/content_round.php?page=done&l=img546/2064/thecranklayout001.png&via=mupload&newlp=1

LucifersTrip

#1
August 26, 2011, 03:36:55 PM
It looks like a standard in/out:
always think outside the box

soupbone

#2
August 27, 2011, 05:26:23 PM
Awesome!Thanks for the pic!
Print
Go Up Pages1
User actions