IC Based Overdrive Off-Board Connections

[CBD]

Since I do Not have Strip board, I thought I would try this one.
A few questions though,
What do I connect to Volume Pot #2 ?
What do I connect to Gain Pot #1, #3 ?
Where do I connect the output on the board?

Picture of the Layout below
http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=7179&g2_serialNumber=2

[deadastronaut]

    tiny pic?....

[arma61]

a better picture  



1 - What do I connect to Volume Pot #2 ? this is yout output - see point #3

2 - What do I connect to Gain Pot #1, #3 ? looks like it contains a small error, gain pot #2 & #1 go to grond (point 4 or 5 or 6), and #3 goes to point 2 on the layout, connected to 4.7k resistor

3 - Where do I connect the output on the board? see #1

enjoy it!!

Ciao

Armando

[deadastronaut]

ahhhhh i can see!...

[CBD]

Thanks all.............. I don't know why I am still having trouble identifying how the signal flow should go.