Russian Small Stone Issues

[dumbmonkey]

Hi everyone,
I have a problem with a Black Russian Small Stone that I was working on for a friend.  I was initially going to install a blue 3pdt switch in there for true bypass, and now I don't have any phasing effect.  As nothing is labeled on the board and all the connections are white wires, I tried to trace everything as best I could.  I thought that I might have had the board in and out reversed but when I tried that the other way, I got some crazy oscillation so I put the leads to where I had them originally.  Now, no phasing.  If I rotate the pot back and forth, the phasing shifts but not so otherwise.  It's not rotating on it's own.  Did I totally screw something up?
Thanks for any insight you might have.
Chris

[texstrat]

Chris:

Pictures are worth a thousand words. But in the mean time take a look at this to see if it will help troubleshoot your problem, http://www.generalguitargadgets.com/projects/23-phase-shifters/51-small-stone-information

GGG off board wiring works and I use his diagram with all my boards.

Good luck.

[dumbmonkey]

Hey!
Thanks for the advice.  I've got some photos, I'm hoping someone can give me some ideas.
Here's the trace side:
http://dl.dropbox.com/u/38317364/IMG_0825.jpg
And here's the top:
http://dl.dropbox.com/u/38317364/IMG_0826.jpg

[Jdansti]

Was it working before you installed the switch?  If so have you tried going back to the original configuration?

[dumbmonkey]

actually, going back to the original switch was my next step...