second set of eyes appreciated if ya gotta minute.. ;)

[pinkjimiphoton]

did i get this:




right?

[rousejeremy]

That 68K goes where it should, but the emitter of Q4 doesn't.

[garcho]

a jump to ground from L to E?

[rousejeremy]

The emitter of Q1 is jumpered to the collector, should go to ground

[rousejeremy]

a jump to ground from L to E?

Would need a trace cut before the trimpot too

[pinkjimiphoton]

the emitter of q4 is grounded to rail L.

you sure? i'm not following ya bro...there's a jumper from L3 to ground that q4 and  c 6 both ground to.

[rousejeremy]

the emitter of q4 is grounded to rail L.

you sure? i'm not following ya bro...there's a jumper from L3 to ground that q4 and  c 6 both ground to.

whoops! and only after two beers. you're right

[pinkjimiphoton]

q1's emitter is definitely wrong...thanks!

there is a jump from l 3 to e 3 already...that connects rail l to rail e (ground)

[pinkjimiphoton]

too lazy to re-do the whole vero, so i just revised it...i can't change the layout after the fact on this machine.

added a cut and a jumper, won't need either, will just jump the emitter to ground when i build it.

no need for a trace cut before the trimmer tho that i can see, you sure bro?

thanks!

[rousejeremy]

The labelling is a little confusing. The fourth transistor (farthest left, where depth pot three goes) is labelled Q2 on your layout. Doesn't really matter since the schemo isn't labelled.
Note that Depth 1 goes to ground as well?
R11 on the schematic is 2.2 ohms, on your layout it's 2.2k.

[pinkjimiphoton]

again, thanks...good eyes.

yes, i know depth 1 goes to ground...should have labeled that i guess.

2.2 ohms? never even SEEN a resistor that small..could probably just use a link of wire i'd imagine!!

will revise...appreciate it!!

[rousejeremy]

No problem bud. Vero is a pain in the a**.
I think the next step is to build it.

[pinkjimiphoton]

here ya go...gave ya props for helping me, too.

next step is to build it, yep...thanks again my friend for all the help!!

have a beer for me!!

EDIT: fixed the vero, this last one should be good to go!!

[rousejeremy]

Anytime.
I've never built or even heard this guy before. Just done Tremulus Lunes myself. I'll give this a go eventually.

[pinkjimiphoton]

these were almost more of a "repeat percussion" kind of thing...really weird trem. gonna put this and a kay fuzz together, owned both probably 35 years ago, my very first toys!!

[pinkjimiphoton]

duh...i am a fool.

the transistors are NPN, not PNP!!!

sorry!!!

i can't believe i got it backwards!!!!! lol