Help with my first pedal (D*A*M meathead)

[objector]

Darn, I was convinced it was going to be that.  Are you sure the other one is 47pf and not 47nf?
It may be just me but looking at the DC adapter, it looks like there a little sliver of wire going from the 9V wire towards the ground wire.  There's nothing touching there is there?

Try quickly going over it and reflowing the solder on the board to make sure all the joints are good.  Plus are you sure the transistors are ok, do you have any more to check it with?

How can I make sure it's 47pf? I ordered the 47pf version and it reads '47' on the cap. I'll check everything as soon as possible. Tomorrow I leave for a festival, so I'll wait to work on the pedal, because I don't want to rush it. I'll bump this topic once I have more info, so I hope you'll read it then! Thanks again for all the advice, it's really appreciated as a total newbie.

[IvIark]

If it just says 47 then it probably is ok