Definitive tips for solving Easy Vibe ticks.

[goldstache]

I have been tweaking around with the Easy Vibe lately and was wondering if RG's TLO62 layout is free from tick.  Wondering also what kind of gain staging I can try to give the effect the ability to have a slight boost in volume.  I combed the Easy Vibe thread and am unsure which PCB to build.  Also, when using TLO62's, which amps should I isolate on another board to help with ticking.  If I decide to go that route instead of all components on 1 board. 
Thanks everybody, get wait to get my swirl on!!!!!!

[slacker]

Going from the original schematic http://www.hollis.co.uk/john/easyvibe.jpg, if you want to add some boost make the 47k resistor in the feedback loop of the first opamp bigger. Or make the 100k resistor connected to the - input smaller.

If you want to split it between two boards then you want to build the 3 opamps at the bottom of the schematic on one board and the five in a row along the top on another one.

[goldstache]

Thanks Slacker, just what I was looking for!!!!!!