Please check my Octavia Vero Layout

[tcobretti]

I had the day off, so I put this together(I haven't seen one for this pedal before).  It's my first layout, so constructive criticism is welcome, and please let me know if anything is wrong.

I'm posting the original schem to make it easier for y'all to check it.  I'd like to thank Phillip for his schem and his site; I've learned some good stuff there.

Thanks!

[MartyMart]

Looks 95% good, but your diodes at the octave section are reversed, check that area
and the output wiring.
I like to use just one "linked" ground trace, so perhaps you could connect yours "on the board"
I almost always use the bottom trace for ground, leads to some "interesting" jumpers though !!

Nice though

MM.

[tcobretti]

I fixed the diodes, and I can't find anything wrong with the output wiring.  What are you seeing?

I know what you mean about the two grounds.  I just couldn't find an elegant solution and decidied that the best way to solve it was two grounds.  That's definitely a possible improvement if I can figure it out.

Thanks very much for the help!

[pappasmurfsharem]

Just wanted to say I just completed your R M Octavia on vero works like a charm. Although I will say that the 10k rev log makes the drive pretty much on or off.

Sounds just like the video I was pming you about and I quite like it.

It didn't work at first and I was fairly heartbroken until I realized I forgot the jumper on the 9v line