powering and wiring up two PAIA pedals with positave,neg AND Ground

[mikeford]

Hullo all!
I am a lurker and REALLY appreciate the info and encouragement found on these pages.
I have two PAIA pedals (a ring mod and a hard to get Phaser w/ envelope follower) that I am gonna box up and am a bit unsure how to get the 18v to them WITHOUT frying 'em!
I wired them up with 2 9volt batteries and they work swell, but I plan on adding them to a pedal-board and need the diagram to include the power jack.
Thanks all!

[Mark Hammer]

Are they running off +18v, or are you calling +/-9v eighteen?

Which circuits, BTW?

[mikeford]

hello. They are of the dual 9v battery variant.
The circuits are  a Paia CA9 ring mod and an old Paia/Craig Anderton  Phase shifter (CA-21)  with an envelope follower(CA-25)
I have all the schematics, but are not sure how to load them up here!
Thanks

[mikeford]

Look no further thsn Mr lee at Paia to know! https://www.paia.com/talk/viewtopic.php?f=8&t=225&p=359&hilit=phase+shifter#p359 I wonder about 9v charge pumps?