Problem with SmashDrive

[GiovannyS10]

Ok, i will try to solve the problems. I cant make it today because im making a new pedal, a thunderdrive for a friend. Have a new problem.  Its never happened with me, but this week i got 2 problems with pedals. I will open a new topic for thunderdrive okay?

He only make noise, no sound, clean or drive...

Tomorrow i will try again to solve the problems with SmashDrive.

[GiovannyS10]

WORKED!!!!! 

Transmogrifox, the problem was the ground same. I tested it now, the sound is incredible for a small and easy pedal! Now i will to put a volume pot and post the result. But the low control not worked, only drive and treble and mid. I spin the low pot but nothing happen.

Thanks so much you all, you helped me a lot.

Thank you very much special for Transmogrifox. You found the problem! 

Now i only have a problem with thunderdrive. You can help me with this problem too?

Thanks, thanks!

[GiovannyS10]

Guys, i made some changers on the Smash's PCB. For have 2 tones controls and made a PCB for 3PDT and a PCB for Power Input. On power input i will connect the all negative wires, and connect only one negative wire on the principal board.

I put my name on the board for the changes, and put the Aron's name, for the design.

What do you think about these changes? You think will work right?

On the out you use a 1M pot. I change any components too for have a sound more heavy. I will post the compoents list after.