LOOPER Question

[darrenw.sparky]

This is just a quick example
Say I had the DLY + Multi On, would this switch system work so it would place the Multi before the DLY, is it ven the right sort of switch or can someone think of a better way of doing it

[chuckd666]

Hey dude I saw you post this on the madbean forum, you're going to be a little clearer with what you want because your description is pretty hard to understand. 

[MrStab]

you can plug anything into the different Send/Returns. in your diagram, the signal flows from left to right. forget the different labels and think of each Send/Return as "1, 2, 3 and 4" (and the master bypass switch).

...unless you mean "can i change the order of Multi and DLY?", in which case:



you could maybe just patch 2 sets of inputs/outputs together before and after the other, eg. Multi goes to 2 & 4, DLY in 3, and make sure only 2 or 4 is activated at any time, but that could be annoying and could maybe cause feedback if they're both on. hope i'm making sense!

[vigilante397]

Are you talking about the switch drawn off to the upper right side? No, that would absolutely not switch the order of the effects.