Snow White Auto Wah, no change in signal through board. Please help.

[Vicval01]

After a successful basic Bazz Fuzz build, I had a crack at the Snow White Auto Wah.
I'm getting signal through bypass, and the same through the board, with a slight difference when I manipulate one of the pots, but it is barely discernible.
Here's the link to the build:http://tagboardeffects.blogspot.com/2013/04/mad-professor-snow-white-autowah.html

Here are the voltages:
Input voltage = 9.35

IC 1
1. 1.24   16. 1.22
2. 0        15. 0.1
3. 4.16   14. 4.15
4. 4.16   13. 4.15
5. 5.33   12. 5.37
6. 0        11. 8.30
7. 5.33   10. 5.37
8. 4.14   9. 4.17

IC 2
1. 2.04   14. 3.88
2. 4.09   13. 4.15
3. 4.15   12 4.14
4. 8.30   11. 0
5. 4.15   10. 4.10
6. 4.16   9. 4.15
7. 4.15   8. 4.15

D1 A 5.05 K 8.30  K is higher than A, is that right?

D2 A 9.38 K 8.67

D3 A 4.08 K 4.05

D4 A 2.38 K 2.02

D5 A 5.00 K 4.15

VR I 5.05  G 0   O 8.30

Q1 D 8.3 S 5.74 G 2.05

Q2 C 5.04 B 2.06 E 1.72

Q3 C 5.05 B 2.50 E 1.23

I've attached a couple of photos.
Much appreciated.





Thanks in advance.

[Kipper4]

Not sure if the IC numbering is related.
You dont say if you made the std version or the modded one.??


http://tagboardeffects.blogspot.com/2013/04/mad-professor-snow-white-autowah.html

[Vicval01]

Thanks for your reply, sorry, not sure when you say, "Not sure if the IC numbering is related."
Made the modded version.

[Kipper4]

What I mean is. I'm not sure the ic numbers in the schematic match the ones in the vero layout.

Go ahead and search the forum for the snow white , debugging, voltages, problems.

You will surely come up with some useful results

[Vicval01]

Great, thanks. I'll check it out.