SMD LED Bezel Options

[davidaly46]

I am looking for some options for LED bezels or lenses that could work to show light from a board mounted SMD LED. Maybe something similar to an amp LED jewel, but preferably cheaper. Anyone have suggestions?

[EBK]

Maybe you need some sort of acrylic light pipe.

[davidaly46]

Maybe you need some sort of acrylic light pipe.

My thought process is that I can get the LED to shine bright enough from the board to show through any translucent cap or lense, but im looking for something off-the-shelf that i can fairly easily implement in a stompbox.   

[Fancy Lime]

Not exactly off the shelf but: how about a hole? That only works if the board is close to the surface, though. Otherwise, you could mount a fresnel lense like this directly in a hole in the enclusure:
https://www.musikding.de/Fresnel-lense-5mm-square-flat-clear
Should distribute the light OK, but of course it would not be visible from all angles as well as a box mounted LED would. Comes in other colors as well and also in 3mm:
https://www.musikding.de/LED-Bezels-5mm
https://www.musikding.de/LED-Bezels-3mm

Andy

[chbeer]

I used something like this: https://m.reichelt.de/lichtleiter-1-fach-3-mm-planar-gerade-men-12751003-p232150.html?&trstct=pol_19

[EBK]

I used something like this: https://m.reichelt.de/lichtleiter-1-fach-3-mm-planar-gerade-men-12751003-p232150.html?&trstct=pol_19

Translation: acrylic polycarbonate light pipe.

[vigilante397]

I mount SMD LEDs behind submini tubes and let them shine through the tubes, so I guess I use 6N21B as my bezels