Designing PCB from Layout

[DJPsychic]

Hi all,

Is there anyone who can help me design a PCB from a layout? It's just a simple fuzz face with a couple little differences. I plan on using oshpark.com (I think). amzfx uses them so if it's good enough for him I guess...

feel free to message me if you feel up to it. I can compensate if necessary, but don't have a ton of $ to offer...It's just me and I only plan on making a handful.

any guidance/help would be greatly appreciated, thank you!

[Marcos - Munky]

I don't really got your request. If it's from a layout, then you probably already have a pcb for it. Or should it be from a schematic?

Also, if it's a fuzz face, it's very possible to already have a layout on oshpark, unless you want specific things like pots on a specific location.

Anyway, what exactly do you have in mind? Maybe some people have done it and can share a layout.

[DJPsychic]

I don't really got your request. If it's from a layout, then you probably already have a pcb for it. Or should it be from a schematic?

Also, if it's a fuzz face, it's very possible to already have a layout on oshpark, unless you want specific things like pots on a specific location.

Anyway, what exactly do you have in mind? Maybe some people have done it and can share a layout.

Hey there

I have a layout/wiring diagram, but no schematic. I don't know how to draw schematics yet. It is a npn fuzz face with a couple minor additions.

I'd like to have  PCB made for it and was seeing if anyone could make a PCB design based on my layout

[Marcos - Munky]

What minor additions? And you have a layout, but what is it? Vero?