Alternatives for q2 and q3 on a Tonebender Mark I

[MordechaiBenZev]

Hi all.  I just built up a Tonebender Mk I that sounds phenomenal.  Q1 was an OC75 (65 Hfe, moderate 380 leakage) and I used two Philips AC125s for the other two transistors (125 and 100 Hfe respectively, both 400 leakage). 

A friend asked me to build one for him, but I am wondering what other transistors some of you have used for the Q2-Q3 positions.  I have a few AC125s left but they're out of spec.  I also have some 2SB54s and a few 2SA354s that may be in spec in terms of gain and leakage, but after doing some research I've found not a single report of anybody using those for this circuit and I suspect they just aren't "right" for it.  I'd be curious to know what devices other people have found to perform well in those positions. 

[mac]

Those Toshiba 2SB54 and 2SB56 are great for fuzzes. But it's possible that they don't leak as much as this circuit needs. The ones I have are all below 150ua.
Can be solved tweaking the base resistors at q2 and q3.

mac