Jordan bosstone/yorggen Toneboss Phorhas

Started by John Lyons, April 14, 2005, 09:35:16 PM

Previous topic - Next topic

John Lyons

There is a schematic posted on the Diystompboxes.com site but the resolution is really poor, I can't read it. The poster is Phorhas.

Anyone have this schematic in a decen resolution? It's a bit different from what I can tell than the usuall bosstone so I'd like to see it.

Thanks

John
Basic Audio Pedals
www.basicaudio.net/

jmusser

I took a look at it, and if you were to go ahead and print it out, blow it up on the printer and add in the values. You can make out the values on the post, but not at all if you print it. You could also use the direct approach, and have him E Mail you a scanned copy.
Homer: "Mr. Burns, you're the richest man I know"            Mr. Burns: Yes Homer It's true... but I'd give it all up today, for a little more".

John Lyons

I'll try it again

The site I meant was diypedals.com   Not stompboxes.com....

I would ask for a better copy but I don't know where to get his email  email address.

Looks a bit different...4 diode pair and another 2 diodes to ground as well. and some soret of tone knob/input cap at the front of the first transistor..

Hopefully I can get the info off the schem..

Thanks J , Love you EZ build layouts!

John
Basic Audio Pedals
www.basicaudio.net/