Vintage EH MicroSynth power transformer ratings?

[nirvanas silence]

The tranny finally died and I'm looking for the specs so I can replace it.  Any help?  Thanks!

[Bill Bergman]

I may be way off, but it's seems like it might be as little as 100ma. Doesn't it have the specs imprinted on the wallwart or is it interna?

[nirvanas silence]

Transformer is inside the pedal, not a wall wart.

[Bill Bergman]

The power supply is unusual. It requires +9 and -10. I built a suppy using a 24vac Ratshack transformer.

[nirvanas silence]

Is that 9+ and 10- DC?  I don't have a schematic at the moment but I'll dig one up.  Also, all the transformers I'm seeing now have a center tap.  Should I use 12 or 24?  I can't remember if its measured peak to CT or peak to peak.

[puretube]

2x12V; (12-0-12)

[Bill Bergman]

Can't say for sure on an original on how it should be setup. Don't think tis will help much but here is a pic of mine...second from last http://www.freewebs.com/elroy2/  I'll try and find more info. It's been a while and I forgotten.

[puretube]

schemos found here:
http://diystompboxes.com/sboxforum/search.php?sid=4d6f021f52854807450c6ccf0a0ef815

[nirvanas silence]

Searching for microsynth just got a list of emails of people asking for the schematic.  If anyone has it can they send it to:
nirvanassilence@charter.net

Thanks alot.

[puretube]

:roll:
I got 6 schemos within the first 15 posts (of 108 on the list) ...

[nirvanas silence]

:roll:
Thanks for the direct link while you did all that searching, really saved me some time...

[puretube]

the answer lies in Aron`s last post here:
http://diystompboxes.com/sboxforum/viewtopic.php?t=33569

(compare the time-stamps!)

[Paul Perry (Frostwave)]

It might be difficult to get a reliable mains transformer that small. I've seen small transformers fail, even when they aren't being run at double voltage!