An input switch question

[jimbob]

I was thinking about adding a switch to choose between 2 different input  caps for my fuzz face. How would i do this? I know this is such a beginners question but im horrible at switch questions.

Maybe a dpdt switch? Im wanting to make a bright/dark switch. what would connect to what?

sorry for such a simple question. Is there a diagram out there for this im missing or over looking??

[petemoore]

Caps equate opposite to resistors
 two caps of .1uf, paralleled will be double value or 2uf.
 By switching one of them out you can have variable input cap value using a simple SPST switch.
 Another way to do it is parallel the caps, [this halves the value] and use an SPST to short across one of them.
 Another way is to use a DPDT switch, run the signal path through the 'middle lugs' and different sized caps on either path through the switch.
            I  Cap  I
  Input  I switch I  Output
            I  Cap  I
---------------------------