Footswitch for my Tour RTeberb Attax 100

[Atk]

I look for build a footswitch to change clean/crunch e lead channel on my amp...

The H&K footswitch is a FS2...

Can you post a schematic with led?

Ola :lol:

[ninoman123]

This really depends on the type of amp you have. I havent personally looked at a schematic for your amp, but if its a simple SPDT then it would work, but if it is something more difficult that requires more complex wiring and/or other electronics then it would be more difficult. Schematics for footpedals can be hard to find too, unless the schematic for the amp shows it but most do not especially if its a newer amp. Im sure you can research online to find a schematic for your amp/footswitch. If you can do that we can help you along but we arent just going to spoon feed it to you. Unless someone has already done all the research and/or already built this.

[cab42]

I build such a switch for my amp a while ago. A drawing is posted here:

http://www.diystompboxes.com/sboxforum/viewtopic.php?t=25919&highlight=

However, I have no idea whether this will work on your amp.

Ciao

Carsten

[truce11]

Now that I've reread it during daylight, my post is a bit incorehent.

Basically, I was just curious about how 2-channel footswitches were designed for amps.

The amp in question is a Vox AD30VT.  The stock footswitch is the VFS2 which has two stompswitches labeled 1 and 2.  

- Cab, I'm pretty sure that schematic isn't it.

thanks