Ibanez Ts-7, is it good?

Started by ddes, September 29, 2005, 02:03:53 PM

Previous topic - Next topic

ddes

Hi!

I'm thinking of buying my first pedal (yes, the very first). It's used and only 400EEK or a bit over 30$.
Is it the tubescreamer? Should I buy it?

http://ibanez.com/accessories/spec.asp?m=23

Thanks!

cd

It certainly sounds like a Tubescreamer, and comes complete with a JRC4558 opamp.  For $30, you can't go wrong.

HOWEVER, it makes a lousy modding platform.  There are multiple PCBs with push-on connectors, meaning taking it apart/putting it back is a pain.  The PCB is also low quality so you have to be extremely careful when unsoldering components, the traces break off very easily with too much heat.  About the only good thing is that there's tons of room on the main PCB, so you can use oversize components and bend them around to make them fit.

MartyMart

They are not bad, quite a solid/heavy pedal and it has the "Hot gain" switch on it which is fun !
You can also do all the "808" type mods to it quite easily .... however .....

For 30 dollars you could just about build a nice clone, with true bypass switching etc
and have it sounding the way you want it to  :D

Marty.
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com

tiges_ tendres

I realy like mine unmodded.  It's very transparent, really lets the tone of the guitar through.

I took mine apart and was shocked to see how small the circuit was, yet the board was huge!
Try a little tenderness.

ddes

Ok, thanks! I'll buy it!

The problem is, I can't get 3DPT in here and my right hand is in a plaster cast  :-\. Till next friday. My elbow has a piece comen off. Lol...


Thanks!

JimRayden

Welcome, fellow estonian. So now there's three of us here.

About the pedal, beware of the switch, under that huge foot platform, there is a tiny-tiny switch mounted on a PCB, and on my TS7 the switch is starting to give up.

Jõudu! :)

Quote from: tiges_ tendres on September 29, 2005, 03:02:15 PM
I took mine apart and was shocked to see how small the circuit was, yet the board was huge!

Yes, it looks like they're using the same board for all the ToneLok series effects.
And yea, they sure have made the innards complex for such a simple circuit.

----------
Jimbo

ddes

I bought it :)
I should get it tomorrow!

JimRayden@ ohoo! vägev!  Eestlane! Mihkel on kolmas? Olen ta poste näinud :)
kui ei ole käinud siis http://kitarr.astar.ee/forums/index.php !

Kust sa 3DPT lüliteid saad?  :icon_razz:

Egert

JimRayden

Jep, Mihkel jah. Uurin seda foorumit, paistab huvitav. Loodame, et see järjekordne Rada7 pole, sõimavaid punkareid ja metalliste täis. :)

Vend elab poole jalaga USAs, tema kaudu ostsin Väikese Karu poest karpe, pesasid ning DPDT lüliteid, eestlase jaoks on 3PDT liiga kallis. :D

-----------
Jimbo