Smash drive..... ?

[yoghurt-feen]

Hey! I found another schematic then the one you guys have here.......
The schematic is at http://monday.users.whitehat.dk/smashdrive_lo.gif
...this is the first time i try to built a stompbox, really cant figure out which components i need...... can anyone help me?

...i have tried to use the search at this forum without luck....

EDIT: Which LM386 do i need? I have found a lot of different versions...

// Yoghurt Feen
(The Yoghurt Fairy)

[petemoore]

  I built a couple of them using LM386 sourced from Radio Shack. Any 386 will work.

[yoghurt-feen]

  I built a couple of them using LM386 sourced from Radio Shack. Any 386 will work.

Okay but i have found a LM386-3 which is 1W and a LM386N which is 0,5 W 

[Transmogrifox]

use the LM386N
I think either would do fine, but I have used the LM386N with no problems for the SmashDrive

[Steben]

Smash drive is low power circuit. Even 0.5W is hotter than needed. It makes no difference.

[yoghurt-feen]

*bump*

[Peter Snowberg]

I've tried several 386s and I like the JRC386BD the best in my test circuits. The second choice is the LM386-4 or -3.

[yoghurt-feen]

So you are saying that LM386N is bad? or?