Danecho - delay time switch not working. Schematic?

[scumbag]

Hi folks,

so I just finished installing a switch on my Danecho to switch in and out a 15k resistor in parallel with the one in series with the repeats pot - in order to be able to get it to self-oscillate at the flick of a switch. This worked beautifully.

On completion of this, I tested and notice that my Danecho seems to be stuck on the "short delay" side of things. Flicking the switch to change it to long delay has no effect at all, but the delay time knob still works. I have checked the actual switch itself and it seems to work just fine... I'm just wondering if anyone can help me trace the problem? I'm thinking there's a resistor somewhere that is switched in and out (just like what i did for the self-osc. mod), but I've been staring at the board for about an hour and I can figure it out.

Does anyone have a schematic for this pedal, or any idea how I can fix this problem? It has me rather perplexed.

(and yeah, I'm a bit of a n00b so be gentle with me  )

thanks guys,
scott

[scumbag]

Sorry for the bump, but I'm getting desparate! 

Any advice or help would be hugely appreciated.