EH Worm - A Favour

[jimmy54]

He fellas,

I'm in the process of putting my EH Worm pedal in a different enclosure and stupidly didn't note what colour wire went where from the circuit board, switch, jacks.  A couple of wires have come off in the process and I was wondering if there were any EH Worm owners who could check inside theirs and tell me what colour wires go where.

I know that the blue wire that comes from lug 5 of the DPDT switch goes to a point on the PCB marked 'S1-5', and I know where the output jack goes.  I'm not sure where the yellow input jack wire goes.

Cheers

[jimmy54]

Don't worry, I've sussed it out.

[Mark Hammer]

Don't be embarrassed at all about a false alarm.  It's good for newbies to know that it IS possible to figure out these things on your own, without a schematic.

[Peter Snowberg]

When all else fails, here you even have the luxury of asking the designer of the circuit. 

Glad you get it figured out!

[jimmy54]

Thanks fellas.  I must it admit, it is a far more satisfying feeling solving something for yourself (especially if you're the one who %^&*ed it up in the first place )

And I'd like to say to that designer, great pedal.

[A.S.P.]

When all else fails, here you even have the luxury of asking the designer of the circuit. 

Glad you get it figured out!

too late for answers - game over