Tonepad Rebote Delay 2.5 questiion

[hari]

I ask friend to build Rebote Delay 2.5 from Tonepad, but I Can't find some parts value such as: Resistor 240 K, 510 K, Capasitor 0.082 uf, 0.027 uf, 51 pf

Electronic store here said that those are "strange" value..

Can I just replace them with the other value, 240 K = 270 K, 510 K =  560 K etc. ?


thanks for answering

[gak]

i don't think that changes will make big difference
or you can always achieve closer values adding resistances in series, eg: 220k + 22k, 470k + 39k... etc
the only substitution i've made on my rebote delay was a 47pF instead of the 51pF cap and i can't compare results but all can i say is that stills sound great!
go ahead!

cheers

gak.

[boogietube]

For caps, I usually go to :
http://www.justradios.com/orderform.html
Awesome service!

For Resistors and caps (some wierd cap values - all resistor values), I order from:
www.futurelec.com
Don't expect a quick turnaround from futurelec. They take a while.

Also, the best mica site including the ELUSIVE 51pf cap!!
http://www.circuitspecialists.com/level.itml/icOid/3433
Good service.

Switches transistors and other various stuff from Aron or Small Bear.
(you probably already know that)

Hope this helps!!
Sean

[boogietube]

Sorry I made an error:

www.futurlec.com is the right address.

[Bron-Y-Aur-Stomp]

first of all, the resistors falls in the 5% range

[hari]

well thanks for help

Gak, I heard one of your MP3 samples, it sound great.

thanks